Stable Power Module is professionally designed with power IC 5V-5A to provide stable power for Companion computer as well as peripheral devices. It also has a built-in Serial port for connecting Companion computer and flight control. All connector in Stable Power Module is dronecode standard (JST GH and Molex CLIK-Mate).

Strong and Stable

  • 5V-5A
  • Resist fluctuated, noise of electric power

Easy Connect

  • JST-GH (Serial)
  • Molex Clik-Mate (Power)

Compatible

Compatibale with companion computers which have Rasp Pi pin out (2x20 2.54mm)

What is Stable Power Module

  • The most important component for the stable operation of the Companion computer is the power supply. Experience has shown that most problems, such as instability, frequent errors and crashes, are due to an unreliable power supply.
  • And on drone, electric power is fluctuated and noise by the device like ESC, motor, servo....So, stable power supply for companion computer on drone is the challenges
  • Stable Power Module is professionally designed with power IC 5V-5A to provide stable power for Companion computer as well as peripheral devices. It also has a built-in Serial port for connecting Companion computer and flight control. All connector in Stable Power Module is Dronecode standard (JST GH and Molex Clik-Mate)
Stable Power Module

Stable Power Module vs Traditional Setup (UBEC, DIY Cable)

Features Stable Power Module Traditional Setup (UBEC, DIY Cable)
Connector
  • High quality
  • Easy connect with dronecode standard (JST-GH, CLIK-Mate)
  • Low quality
  • Diy
  • Not standard
  • Setup
    • Fast
    • Plug and Play

    You must solder and diy:

  • UBEC to USB cable
  • UART port to telemetry cable
  • Power
    • Stable 5V-5A
  • Unstable (rasp pi may be reset or crash)
  • Look
    • Compact
    • Professional
  • Bulky
  • Non-professional
  • Design for
    • Supply power Raspberry Pi on drone
    • Connect Pixhawk to Raspberry Pi
  • Supply power for RC part
  • Easy Connect

    This Package Includes:

    • 1 x Stable Power Module
    • Header
    • 1 x Serial Cable
    • 1 x Battery Cable (Molex CLIK-Mate to JST-Female Battery)
    • 1 x Molex CLIK-Mate to Bare (You can soder Connector Battery or Peripheral)
    Package Stable Power Module Without Header

    Easy Connect

    Easy Connect

    Compatible with all Rasp Pi models

    Rasp Pi

    Compatible with Odroid-C2

    Odroid-C2

    Technical detail

    Weight 21gram
    Dimensions 60 x 35 x 15 mm
    Power Input 7 to 36V power input (CLIK MATE 2.00mm)
    Power Out

    5V/5A for

    • Rasp Pi (Jump 2.54mm)
    • Cooling fan, Peripherals (CLIK MATE 2.00mm)
    Features
    • Serial port (JST-GH)
    • Reverse voltage protection
    • Resist fluctuated, noise of electric power
    • Green Led Indicator Power
    Compatible
    • Compatible with all companion computer which have Rasp Pi pinout (2x20 2.54mm)
    • All Raspberry Pi models
    • ODROID-C2
    • Rock64
    • Pine A64-LTS
    • Orange Pi Plus2
    • Le Potato
    • Banana Pi M64
    • Tinker Board S
    • Rock Pi 4 Model B
    >